4-Compartment Desk Organizer Tray | Support-Free Valet Dish

💎 To get the full library of 3D models with commercial use and Custom Orders, join our Patreon here: https://www.patreon.com/thegulzar3d

🗂️ 4-Compartment Desk Organizer Tray | Clean Workspace, Focused Mind

Minimalist rounded geometry. 4 dedicated sorting zones. 100% Support-Free.

Streamline your workspace with the Compartment Desk Organizer Tray. Designed with soft, organic outer radii and ergonomic scoop-friendly internal wells, this modern catchall caddy organizes everyday stationery and pocket EDC essentials in one low-profile, clutter-free station.

At 210 × 125 × 30 mm, the tray features a balanced layout: one large primary bay for writing instruments and notepad blocks, paired with three front-facing utility pockets for small loose accessories. The smooth curved transitions along every inside pocket ensure coins, paperclips, and small bits slide effortlessly into your fingers without getting caught in sharp corners.

📦 Compartment Breakdown & What Fits Inside

• ✏️ Main Long Bay: Holds full-length wooden pencils, executive pens, markers, stylus, plus a full 3" × 3" (76 × 76 mm) Post-it sticky note pad side-by-side.
• 🧽 Front Pocket 1 (Left): Sized for block erasers, pencil sharpeners, or wireless USB dongles.
• 📑 Front Pocket 2 (Center): Ideal for paperclips, binder clips, staples, or memory cards.
• 🔑 Front Pocket 3 (Right): Perfect drop spot for loose coins, house keys, thumb drives, or wireless earbuds.

✨ Key Design Features

• 🚫 100% Support-Free FDM Printing: Clean vertical walls, flat bottom surfaces, and filleted transitions bridge seamlessly with zero support structures and zero post-cleanup.
• 🤲 Scoop-Friendly Pocket Radii: Inside corners feature generous floor fillets so you can easily sweep out tiny clips and change with a single finger swipe.
• 🏢 Modern Scandinavian Aesthetic: Clean, thick-walled minimalist silhouette that complements both home study setups and executive office desks.
• 🛡️ Stable Anti-Slide Footprint: Wide, low-profile base stays grounded on your desk pad without sliding or tipping.

📐 Dimensions & Specifications

• Length: 210 mm
• Width: 125 mm
• Height: 30 mm
• Layout: 1 Large Multi-Item Basin + 3 Quick-Access Front Pockets.
• Print Style: Monolithic single-piece solid print (zero assembly, ready to use right off the build plate).
• Bed Compatibility: Fits easily on any standard 3D printer build plate (220 × 220 mm and above).

⚙️ Printing Settings

• Support: None Required.
• Design Note: All interior dividers and exterior walls are drafted with self-supporting FDM angles.
• Orientation: Print flat on its bottom face.
• Layer Height: 0.20 mm or 0.28 mm (0.28 mm provides rapid printing; 0.20 mm gives a silky-smooth finish on the top rounded rim).
• Wall Loops: 3 to 4 loops (Ensures thick, solid sidewalls and a substantial, premium feel).
• Infill: 10% - 15% (Gyroid).
• Material: Matte PLA, PETG, or PLA+ (Terracotta Red, Forest Green, Slate Gray, or Matte White highlight the clean aesthetic best).